Security System Reviews » SECO-LARM Motion Sensors

Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor with 35 Foot Range

DJalmeda — Sun, 25 Jan 2009 22:47:18 +0000

Basic product information

Ever wanted to enhance the security to every external entry point of your home or office? You can do so by setting up the Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor. This dependable Transmitter/Receiver sensor has a strong all-weather waterproof enclosure and a range of up to 35 feet that ensures reliable operation in just about any environment. The kit consists of brackets designed for wall mount applications for both the sensor unit and the beam reflector. Some typical applications for this product would be as a safety sensor for garage doors or outdoor gates, overhead door security sensor, entry detection for store fronts or to assist in measuring parking distance. Once the beam is broken, the sensors will immediately activate the LED light and trigger a normally closed or normally open relay output on your alarm system or warning device. This product requires a 12VDC-240VDC or a 24VAC-240VAC power supply (sold separately).

Basic specifications

Create an invisible security barriers for driveways, gates or garages
Pre-wired a six foot cord with SPDT normally closed and normally open relay outputs
Weatherproof rating for outdoor applications
Adjustable sensing distance

What’s Included

Transmitter/receiver sensor
Reflector
Sensor mounting bracket
Reflector mounting bracket
Mounting hardware
Owner’s manual

Enforcer Flush-Mount In-Wall Photoelectric Beam Sensor with 16 Foot Range

DJalmeda — Sun, 25 Jan 2009 08:52:55 +0000

Basic product information

Ever wanted to amplify security to entryways at home or in your office? Then the Enforcer Flush In-Wall Photoelectric Beam Sensor is the product that will gratify your need for security. The Transmitter/Receiver has been specially designed to fit into a single-gang box for a flush mount application and the beam reflector simply mounts on the wall across from the transmitter/receiver up to 16 feet away. The transmitter/receiver and reflector will not only be eye-catching, it will not stick out from your wall as other ordinary similar plug-in modules will. Beam alignment is modifiable up to 15 degrees horizontally or vertically, making installation an easy process for anyone. A typical application for this product is to position the beam up across an entryway or hallway in your home, office or retail shop. As soon as the beam is broken or disturbed, the sensor will turn the yellow LED light on and trigger a normally closed, normally open or common relay output on your alarm system or warning device. This product requires a 12VDC Power Supply (sold separately).

Basic specifications

Transmitter/receiver fits into a single-gang box and the reflector is a simple wall mount
Easy installation with adjustable beam alignment
16′ (5m) range for beam
Normally closed, normally open and common relay outputs

What’s Included

Enforcer Photoelectric Beam Transmitter/Receiver
Enforcer beam reflector
Mounting screws
Owner’s manual

Enforcer Flush-Mount In-Wall Photoelectric Beam Sensors with 33 Foot Range

DJalmeda — Sun, 25 Jan 2009 08:23:27 +0000

Basic product information

Enhance the security to any entryways at home or in office by installing the Enforcer Flush-Mount In-Wall Photoelectric Beam Sensors. Particularly designed to fir into a single-gang box for a flush mount application, these sensors will not only be stylish/attractive, they will not stick out your wall and be too exposed as common similar plug-in modules do. Its beam alignment is adjustable up to 15 degrees horizontally or vertically, making installation a convenient and effortless task. A usual application for this product is to set the beam up across an entryway or hallway in your home, office or retail shop. Once the beam is broken or disturbed, the sensors will turn the yellow LED lights on and trigger a normally closed, normally open or common relay output on your alarm system or warning device. This product requires a 12VDC Power Supply, (sold separately).

Basic specifications

Appealing flush-mount design fits into a single-gang box
Easy installation with adjustable beam alignment
33′ (10m) range for beam

What’s Included

Enforcer Photelectric Beam Transmitter
Enforcer Photoelectric Beam Receiver
Mounting screws
Installation manual